FOSC FTTH-3007

FOSC FTTH-3007

Features

• Excellent mechanical property & performance
• Chemical and hydrolysis resistance
• Anti-termite
• The housing is much thicker which provides closure effective protection from impact and press.
• The inner structure is also improved, bigger space provided.
• It is major product which with '*' label.

FTTH-3007* Datasheet

Remark:

• FTTH-3007 is provided with 4-inlet/outlet ports, two small ports of which suit for single fiber cable with max. diameter Ø21mm ,two big ports of which suit for single fiber cable with max. diameter Ø41mm or double fiber cables with max. diameter Ø21mm, Ø12.5mm and Ø21mm elastic seal ring (which can shrink to Ø7mm and Ø13mm) can be installed in two small inlet/outlet ports; Ø31mm and Ø40mm one-port (which can shrink to Ø32mm and Ø22mm) and Ø21mm, Ø18mm and Ø14.5mm two-port elastic seal rings (which can shrink to Ø18mm, Ø14mm and Ø11mm respectively) can be installed in two big inlet/outlet ports. While inserting cable, please choose corresponding elastic seal rings and gaskets according to the diameter of fiber cable
• The fittings provided with FTTH-3007: 1 pc buffer fly wrench, 1pc small wrench for fiber cable inlet/outlet port,, earthing wire, nylon tie, labeling paper, desiccant, 2pcs of elastic ring Ø12.5mm and Ø21mm, 1pc ,Ø21mm, Ø18mm and Ø14.5mm two-port elastic seal rings, 2pcs of Ø16.5mm and Ø22mm plastic gaskets,2pcs big plastic gasket. The fiber storing space of holding tray is very big, which meet the requirement of frontal installation or back installation, fiber winding, fiber storing and fiber expanding for straight-through fibers.
• Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for bunchy fiber or ribbon fiber (max.6pcs ribbon fiber per tube), 1 pc big metal wrench for inlet/outlet port, 1 set wall mounting bracket.1 set Ø40m elastic seal ring and gasket for selecting. The FOSC base is provided with 2 big inlet/outlet ports that can be through 2pcs of max. Ø21mm fiber cables at the same time. While straight-through fiber cable is for branching application, fibers not cut off are for straight through after being fixed and winded, fibers cut off are for branching after splicing with fibers of other branching fiber cable. The two big inlet/outlet ports are also suitable for splicing directly of big capacity fiber cable.

Manufacturer