FE1-ETH Protocol Convertor

This convertor provides conversion from ITU-T G.703 E1 interface to 1 10/100Base-T Ethernet interface. used widely in connecting between WAN and LAN, monitoring,etc.

• Realize monitor of remote equipment from local equipment( Having two row of LEDs, upper row indicate local status, lower row indicate remote status, unframing equipment have no this function.)
• Based on self –copyright IC.
• Ethernet interface Semi/full duplex self adapt, support VLAN.
• Ethernet interface support auto-mix.
• Provide 2 clock types: E1 master clock, E1 line clock.
• Provide 3 loop functions: local loop, to remote loop, order remote loop.
• Have pseudo random code test function, easy the installation and maintenance.
• E1 can support rate N*64k(N=1-32)
• Provide 2 impedances: 75 Ohm unbalance and 120 Ohm balance.
• Have Ethernet monitor self-reset function, equipment will not dead.
• Provide detecting realtime Ethernet communication status.
• Network manager interface use SNMP.
• Two types:Standalone, desktop, 19inch;Card,usually be inserted in our rack 19 inch.

Technical Specification:
E1 interface

• Interface standard according with G.703
• Interface Rate n×64Kbps , n：1～32
• Jitter tolerance according with G.742 and G.823.
• Transmission capability 1*E1
• Clock  inter-clock, line-clock
• Connector BNC（75Ω）、RJ45（120Ω）
• E1 Impedance 75Ω(unbalance), 120Ω(balance).

10/100 Base-T Interface

• Interface Rate: 10/100Mbps
• Duplex half and full duplex self-adapt.
• Interface character match IEEE802.3, IEEE802.1Q(VLAN).
• Connector RJ45, support auto-mix
• MAC address capability: 4096
• Working environment  power supply AC220V；AC 110V ；DC –48V；DC +24V
• Power consumption: ≤5W
• Working temperature: 0°C ~ 50°C
• Storage temperature: -40°C ~ +70°C
• Humidity 95 %

Ordering:
FE1-ETH /AC FE1-ETH interface convertor,75Ω,120Ω,220V
FE1-ETH /DC/48 FE1-ETH interface convertor,75Ω,120Ω,DC-48V
FE1-ETH /DC/24 FE1-ETH interface convertor,75Ω,120Ω,DC+24V

Packaging Content:
FE1-ETH interface convertor 1  power supply cable(3*0.75mm2)(for DC -48V) 1
BNC male plug 2  AC 220V power supply(for AC 220V) 1
FE1-ETH user manual 1

Manufacturer