CWDM SFP+ 10G Transceiver

The CWDM-SFP+-10G-xxdB-xx nm series optical transceiver is designed for fiber communications application such as 10G Ethernet (10GBASE-ER/EW) and 10G Fiber Channel (1200-SM-LL-L), which fully compliant with the specification of SFP+ MSA SFF-8431.
This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are four center wavelengths available from 1270nm to 1610nm, with each step 20nm. A guaranteed minimum optical link budget of 14/20 dB is offered.
The module is with the SFP+ connector to allow hot plug capability. Only single 3.3V power supply is needed. The optical output can be disabled by LVTTL logic high-level input of TX_DIS. Loss of signal (RX_LOS) output is provided to indicate the loss of an input optical signal of receiver.
This module provides digital diagnostic functions via a 2-wire serial interface as defined by the SFF-8472 specification.

Features:

• Supports 9.95Gb/s to 11.1Gb/s Bit Rates
• Hot-Pluggable SFP+ Footprint
• 18-Wavelengths CWDM DFB Transmitter, 1270nm...1610nm
• 14/20dB Power Budget at Least
• Duplex LC connector
• Case Operation Temperature Range 0°C  to  70°C
• Compliant with SFP+ MSA Specification SFF-8431
• Build-in Digital Diagnostic Functions
• Digital Diagnostic Monitor Interface Compliant with SFF-8472 MSA Specification
  

Applications

• 10GBASE-ER/EW 10G Ethernet
• 1200-SM-LL-L 10G Fiber Channel, 8FC
  
• ITU-T G.709

*if you cannot find a model you need, please, contact with us.

Manufacturer