300A China Fusion Splicer

You are here: Home

Features

Digital fusion splicer with automatic focus function
Advanced automatic fore alignment (PAS) and fully automatic operation
Both X and Y axis display, or display X and Y axis alone, auto check quality of cleaved end-face
Small bulk and light weight with optional function
9seconds splice time and 30 seconds heat time
5.6inch color LCD screen with clear digital image display
Large multiple & visible fiber core
USB port & VGA interface
Concave weatherproof cover & Max. wind velocity of 15m/s

Specifications

Applicable fibers	SM(ITU-T G.652)、MM（ITU-T G.651），DS（ITU-T G.653），NZDS（ITU-T G.655）
Fiber Count	Single
Cladding diameter	80 to 150μm
Coaging Diameter	100 to 1000μm
Fiber cleaved length	8 to 16mm with coating diameter of 250μm or less.16mm with coating diameter of 250 to 1000μm.Optional Set-plate for 8 to 16mm with coating diameter of 250 to 1000μmis available
Actual average splice loss	0.02dB with SM,0.01dB with MM,0.04dB with DS.0.04 dB with NZDS Measured by cut-bak method relevant to ITU-T and IEC standards
Splicing time	9S
Return loss	＞60dB
Splicing mode	40 modes
Splice loss estimate	Available
Storage of splice result	The last 4000 result to be stored in the internal memory
Fiber display	X/Y. or both X and Y simultaneously;200/400 magnification times
Magnification	280x for single X or Y view; or 140x for X and Y view
Viewing method	Two CMOS cameras and 5.6 inch color LCD monitor
Operating condition	0 to 5000m above sea level.0 to 95% RH and -10 to 50℃ respectively

Manufacturer

FTTH-CHINA

E-mail: ftth.china@gmail.com
Tel: 86-21-34635220
Fax: 86-21-34635219